Cab Types Info Tab - Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.3. CEEC300 Function Block
Plain Text
Instance Count

CAB Types Info tab

The CAB Types Info tab contains information about the CAB types loaded in the CEE.
The following table summarizes the parameter data you can monitor on the CAB Types
Info tab of the configuration form for the selected CEEC300 block.
Plain Text
CAB Supported
Version
Enable CAB Runtime
136
Parameter Name
BLKTYPCOUNT
Parameter Name
CC3SUPRTDV
ENABLECAB
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No Shows the number of
instances currently
loaded to the controller.
User
Configurable
No Provides the version
level of the CAB/C300
run-time supported by
the C300. Only CAB
types which require this
version level or lower
can be loaded to the
C300.
Yes Displays whether the
CAB in a C300 is
enabled or disabled.
For application
engineers to be able to
load CAB programs to a
C300, this parameter
must be turned "On."
This parameter is "Off"
by default. You must
turn this parameter "On"
before the first CAB
load. If you want to
disable CAB in a C300
where it was previously
enabled, you must first
delete all CAB
instances and types
from the controller.
Notes
Notes
R500
April 2017