Honeywell C300 User Manual page 98

5. C300 Configuration Form Reference
5.1. C300 Controller Block
Plain Text
Redundancy Delay
(%)
Max Redundancy
Delay (%)
Max Initial Sync Time
(sec)
Max Switchover Time
(mSec)
OPM Freeze Ctrl
Time (msec)
Note: This parameter
is not supported in
this release.
Redundancy History
Time
Event
Reason
Redundancy Link
Failed
OPM Status
Note: This parameter
is not supported in
this release.
94
Parameter Name
RDNDELAYAVG
RDNDELAYMAX
RDNISTIMEMAX
RDNSOTIMEMAX
RDNOPMFRZTIME
RDNHISTTIME
RDNHISTSTATE
RDNHISTREASON
RDNLINKFAILED
RDNOPMSTATUS
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No The average of
redundancy delay CPU in
percent.
No Historical maximum
redundancy delay CPU
value observed since
power up or last statistics
reset.
No Maximum initial
synchronization time, in
seconds.
No Maximum switchover time,
in milliseconds.
No Maximum control freeze
time during an On-Process
Migration session.
No Show time of related state.
No Lists the last 16
redundancy related
activities.
No Indentifies reason for
redundant history state.
No Indicates if Redundancy
link communications are
interrupted.
No Status parameter
indicating the notifications
generated by the primary
controller during an On-
Process Migration
session.
Notes
R500
April 2017