Honeywell C300 User Manual page 146

5. C300 Configuration Form Reference
5.4. IOLINK Block
Plain Text
Priority IOMs
I/O Link Cable Color
I/O Link Number
I/O Link State
Simulation State
I/O Link Soft Fail Errors
(Refer to the Troubleshooting
Duplicate IOL
Address
IOL Channel A
Failure
IOL Channel B
Failure
IOL Maximum Errors
Exceeded
Not Active Supervisor
140
Parameter Name
NUMPRIORITYIOM
IOLINKCOLOR
LINKNUM
STATE
SIMSTATE
section for more information.)
DUPIOLADDR
IOLCHNFAILA
IOLCHNFAILB
IOLMAXERR
NOTACTSUPV
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No Shows the number of
IOMs configured as
Priority IOMs on the
IOLINK.
No Shows the link cable
color assigned to the
IOLink number.
No Shows the link number
within the I/O Link
Interface.
No The current state of the
IOLink, (NOTLOADED,
ONLINE)
No Specifies the current
state of the simulation.
No Indicates if a duplicate
IOLink address has
been detected.
No Indicates if Channel A
of the IOLink has failed.
No Indicates if Channel B
of the IOLink has failed.
No Shows the I/O link has
exceeded the maximum
error limit.
No Indicates that the IOL
interface daughter card
could not transition into
the active supervisor
role.
Notes
R500
April 2017