Honeywell C300 User Manual page 106

5. C300 Configuration Form Reference
5.1. C300 Controller Block
Plain Text
Non-FTE MART Statistics
Address Count
Max Depth
Average Depth
Address Collisions
Current FTE Traffic
LAN_A Tx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
LAN_B Tx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
LAN_A Rx Rate
(kBit/sec)
Note: This parameter
is not supported in
this release.
100
Parameter Name
NONFTEMARTADDRC
OUNT
NONFTEMARTMAXDE
PTH
NONFTEMARTAVGDE
PTH
NONFTEMARTCOLLC
OUNT
LANATXRATE
LANBTXRATE
LANARXRATE
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No Shows number of IP
addresses contained in
the non-FTE MART.
No Shows maximum depth of
the non-FTE MART has
reached (the largest
number of entries in the
table).
No Shows average depth of
the non-FTE MART (the
average number of entries
in the table).
No Shows number of
collisions that have
occurred when hashing
the non-FTE MART
No Indicates communication
transmission rate in
kilobits per second (kbps)
for port A (Yellow Tree
Port) on the FTE Bridge.
No Indicates communication
transmission rate in
kilobits per second (kbps)
for port B (Green Tree
Port) on the FTE Bridge.
No Indicates communication
receive rate in kilobits per
second (kbps) for port A
(Yellow Tree Port) on the
FTE Bridge.
Notes
R500
April 2017