4.12 Copy Control Modules - Honeywell C300 User Manual

4. C300 Controller Configuration
4.12. Copy Control Modules
Step
10
Click Close.

4.12 Copy Control Modules

Prerequisites

Control Builder is running

Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To copy an existing Control Module, perform the following steps.
Step
1
From the Project Tree, select the
desired Control Module block to be
copied.
2
Click Edit > Copy.
Alternate method:
Click <Ctrl>-C.
78
Action
Action
Series 8 C300 Controller User's Guide
Honeywell
Result
The dialog box closes and assigned
components now appear in CEE folder in
Project tab.
Result
Selected Control Module block is
highlighted on the Project Tree.
Selected Control Module block is
saved to Control Builder clipboard
and Name New Function Block(s)...
dialog appears.
R500
April 2017