Honeywell C300 User Manual page 86

4. C300 Controller Configuration
4.13. Assign I/O Modules to C300 IOLINK blocks
2
With IOMs tab selected, click desired
IOM to be assigned to given IOLINK.
3
Accept default IOLINK selection or click
desired IOLINK in list.
4
Click the
assign button.
82 Series 8 C300 Controller User's Guide
Honeywell
Highlights selection and configured
IOLINKs appear in the Assign To list.
Be sure correct IOLINK is selected in list.
Selected IOM is assigned to the selected
IOLINK and appears in the Assigned
Modules list.
Note: You may need to select the
IOLINK in the list to view the IOM just
assigned to it.
R500
April 2017