Control Network Considerations; C300 Peer Communication With Experion Lx Nodes - Honeywell C300 User Manual

Series 8
Component
FTE Cable
Redundancy
Cable
IOLink Cable
Battery Cable
2.6

Control network considerations

In Experion LX system, the C300 Controller exists as a single node on a FTE network.
FTE is the only supported communication protocol for C300 Controllers with
Experion LX.

C300 Peer communication with Experion LX nodes

The C300 supports peer communications with the C300 Controller nodes in Experion LX
Release 500.
R500
April 2017
Description
module.
Note: The C300 Controller IOTA supports
only one controller module.
STP CAT5 Cable with RJ 45 connectors
for FTE connections.
2 m (6.5 ft)
(Y) = Yellow coded boots
(G) = Green coded boots
5 m (16 ft)
10 m (33 ft)
20 m (65.5 ft)
STP CAT5 Cable with RJ 45 connectors
joining primary and secondary controllers.
Multidrop cable assemblies to connect the
I/O modules of a controller IOLink.
Multidrop twisted pair cable to connect
battery power to controllers.
Series 8 C300 Controller User's Guide
Honeywell
2. C300 Controller Planning and Design
2.6. Control network considerations
Model Number
51305482-102 (Y)
513054820202 (G)
51305482-105 (Y)
513054820205 (G)
51305482-110 (Y)
513054820210 (G)
51305482-120 (Y)
51305482-220 (G)
51305482-xxx
xxxxxxxx-xxx
xxxxxxxx-xxx
29