Data Options Tab; Enable Code Id - Honeywell Thor VM1 Reference Manual

Data Options Tab

Start > Settings > Control Panel >Data Collection > Data Options tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the Thor VM1 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
Defining custom Code IDs
l
Disable processing of specified bar code symbologies
l
Rejecting bar code data that is too short or too long
l
Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l
Replacing control characters
l
Adding a prefix and a suffix.
l

Enable Code ID

Choose an option in the Enable Code ID drop-down box:
None
Custom ID
Disables transmission of a Code ID. The only entry in the Symbology combo box is All.
Does not change the scanner's Code ID transmission setting. The combo box in the Symbology con-
trol panel is populated with any configured Custom code IDs.
3-81