Field Replaceable Ups Battery; How To: Replace Front Panel - Honeywell Thor VM1 Reference Manual

Field Replaceable UPS Battery

Requirements - User Supplied:
Torquing tool capable of measuring inch pounds
l
#2 Philips screwdriver bit
l
Caution
Before replacing the Thor VM1 UPS battery, the internal
The UPS battery in the Thor VM1 is field replaceable. Should the UPS battery fail, it can easily be replaced to minimize
downtime.

How To: Replace Front Panel

1. Place the Thor VM1 on a clean, well-lit surface before performing the UPS battery replacement.
2. Place the Thor VM1 in Suspend by pressing the Power button.
3. Remove the Thor VM1 from the Quick Mount Smart Dock.
4. Disconnect the UPS.
5. Loosen the fourteen (14) captive M3 screws holding the front panel. Use a #2 Philips bit.
2-42
UPS battery must be disconnected.