Power Configuration; Power Switch; Thor Vm1 Power Button - Honeywell Thor VM1 Reference Manual

Power Configuration

Power Switch

Once all cables are connected, the Thor VM1 can be powered on.
There is a power switch located on the back of the Quick Mount Smart Dock. The power switch is a rocker switch.
The power switch has a raised bump to identify the switch position even when it is hidden from view. When the side of the
switch with the raised bump is pressed, the power switch is On. If the dock is connected to external power, the dock delivers
power to the Thor VM1.

Thor VM1 Power Button

The power button is located at the top left of the Thor VM1.
If the Thor VM1 is Off, pressing the power button starts the power up sequence.
Note: This assumes that the Thor VM1 is docked in a powered Quick Mount Smart Dock or that the internal
UPS battery has a sufficient charge to power the Thor VM1. If no external power is available and the
UPS battery does not have a charge, pressing the power button causes no action.
If the Thor VM1 is On, pressing the power button places the unit in Suspend.
2-8