Bios; Accessing The Bios Setup; Boot Order; Exiting Bios Setup - Honeywell Thor VM1 Reference Manual

BIOS

The Microsoft Windows CE operating system is installed before shipping. The default BIOS parameters are configured at that
time. In most cases, it is unnecessary to modify the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the drives.
This section is not intended to detail all features of the BIOS, instead it is intended to cover the most commonly used setup
options.
Caution: Be very careful when using this utility to modify BIOS Setup parameters. The Thor VM1 may generate unexpected
results when incorrect or conflicting parameter values are entered. Selecting incorrect or invalid options may
require the Thor VM1 to be returned for repairs.
The parameters should only be modified by Information Services personnel or the system administrator.

Accessing the BIOS Setup

When the Embedded BIOS screen (Phoenix Technologies) is displayed press the Del key to enter BIOS setup.
From the screen displayed, select System Setup Utility.
Use the arrow keys to move around the screen.

Boot Order

To view or edit the boot order, select the Boot tab.
By default, the first device in the boot order is USB Hard Drive.
The second device is the Windows CE Image.
If a USB drive, such as a thumb drive is attached to the Thor VM1, the device attempts to boot from the USB drive:
If the USB drive contains a bootable sector, the Thor VM1 boots from the USB drive.
l
If the USB drive does not contain a bootable sector, the Thor VM1 does not boot. Remove the USB drive and
l
boot the Thor VM1 again.

Exiting BIOS Setup

To exit the BIOS setup, select the Exit tab and select one of these options:
Save Setting and Restart
l
Exit Setup without Saving Changes - When this option is selected, the Thor VM1 does not restart. Press Esc to exit the
l
utility and the Thor VM1 continues booting.
Reload Factory-Defaults and Restart
l
3-21