Volume And Sounds - Honeywell Thor VM1 Reference Manual

Volume and Sounds

Start > Settings > Control Panel > Volume & Sounds
Note: An application may override the control of the speaker volume. Turning off sounds saves power and
prolongs battery life.
Set volume parameters and assign sound WAV files to CE events using these options.
You can also select / deselect sounds for key clicks and screen taps and whether each is loud or soft.
As the volume scrollbar is moved between Loud and Soft, the Thor VM1 emits a tone each time the volume increases or
decreases.
Volume must be enabled when you want to adjust volume settings using keypad keys.
Factory Default Settings
Volume
Events
Application
Notifications
Volume
Key click
Screen tap
Sounds
Sound Scheme
Good Scan and Bad Scan Sounds
Enabled
Enabled
Enabled
One level below Loud
Disabled
Disabled
LOUD!
3-155