Cdma; Activation Type - Honeywell Thor VM1 Reference Manual

CDMA

Use the CDMA tab to activate the Thor VM1 for use with a CDMA carrier such as Verizon. This step is not necessary for
carriers using a SIM card.
The Serial Number, IMEI (International Mobile Equipment Identity) and MEID (Mobile Equipment ID) numbers are displayed on
this tab as the carrier may request this information when setting up an account.

Activation Type

There are two activation methods, Automatic and Manual.
Automatic Activation
1. Select the Automatic radio button for Activation Type.
2. Automatic activation requires an Activation Code. Enter the Activation Code in the Activation Code text box and tap
Activate.
3. All other text boxes are grayed out as no additional entries are required for automatic activation.
4. Verify the activation process is successful by reviewing the message below the Activation Type group.
Manual Activation
1. Select the Manual radio button for Activation Type.
2. Enter the Service Programming Code, System Identification number, Mobile Directory number and Mobile Identification
Number in the appropriate text boxes.
3. The Activation Code text box is not used.
3-109