Keymap Tab; How To Remap A Single Key; How To Remap A Key Sequence - Honeywell Thor VM1 Reference Manual

KeyMap Tab

If 2nd + F5 is remapped to another key, pressing 2nd + F5 generates the remapped key. However, if the next
keypress is Shift, the Thor VM1 reboots. The remapped keypress DOES NOT affect the 2nd + F5 + Shift reboot
key sequence.
Assign settings by clicking radio buttons and selecting keys from the drop down boxes. Tap the OK button when finished. The
changes take effect immediately.

How to Remap a Single Key

1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select the value from the remapped key from the Remapped Key pulldown list.
4. Click OK to save the result and close the control panel.

How to Remap a Key Sequence

1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select Key Sequence from the Remapped Key pulldown list.
4. Select the first key for the multiple key sequence from the pulldown list. Press the Add button to add the key to the
multiple key sequence shown in the Key Sequence box. Repeat this step until all keys desired have been added to the
key sequence. If necessary, use the Clear button to erase all entries in the Key Sequence box.
5. Click OK to save the result and close the control panel.
3-120