Honeywell Thor VM1 Reference Manual page 59

6. Position the replacement front panel so the tab on the back of the front (D in figure above) panel lines up with the slot (A
in figure above) on the Thor VM1. Be sure the two wiring connectors (B and C in figures above) are also aligned.
7. Gently press the front panel into place.
8. Tighten the fourteen (14) captive M3 screws. In the order shown in the top figure above, use a #2 Philips bit and torque
the screws to 6-7 inch pounds.
9. Reinstall the Thor VM1 in the Quick Mount Smart Dock.
10. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.
11. Restart the Thor VM1.
12. When restarted, the Thor VM1 automatically recognizes the keyboard type (12 or 64 keys).
13. If the defroster configuration has changed, use the Test button on the
VM1's configuration.
C. Wiring connector on front
panel
D. Tab on front panel
Peripherals control panel to update the Thor
2-41