Ndislog - Honeywell Thor VM1 Reference Manual

Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
Select load from the Commands list and click the Run cmd button.
Select stop from the Commands list and click the Run cmd button.
Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd button.

NDISLog

NDISLog creates a .TXT file that can be viewed with any text editor program that supports .TXT files.
Command
Command
start
stop
file
Specifies the name of the file to which NDISLog information is stored.
Save File
Stores the file name.
Run cmd
Performs the selected start or stop command.
Function
Starts logging the network traffic.
Stops logging network traffic.
3-131