Install Sim Card - Honeywell Thor VM1 Reference Manual
Vehicle-mounted computer, microsoft windows embedded ce 6 operating system
Hide thumbs
Also See for Thor VM1:
- User manual (272 pages) ,
- Reference manual (198 pages) ,
- Quick start manual (17 pages)
Table of Contents
Advertisement
Install SIM Card
Equipment Required - User Supplied:
Torquing tool capable of measuring inch pounds
l
#2 Philips screwdriver bit
l
1. For convenience, the Thor VM1 can be removed from the Quick Mount Vehicle Dock, though it is not necessary.
2. Place the Thor VM1 in Suspend by pressing the Power button.
3. Place the Thor VM1 face down on a stable surface.
4. Using a Phillips screwdriver (not supplied) loosen the screws and then remove the tethered access panel with the SIM
label. This panel is on the right hand side when the Thor VM1 is face down with the top away from the user.
5. Locate the SIM card installation slot.
6. Slide the SIM card into the slot.
7. Reattach the access panel, torquing the screws to 4-5 inch pounds.
8. If removed, reinstall the Thor VM1 in the Dock.
9. Resume the Thor VM1 from suspend.
2-38
Advertisement
Table of Contents
