Main Tab - Honeywell Thor VM1 Reference Manual

Main Tab

Start > Settings > Control Panel > Data Collection > Main tab
The parameters shown on these panels are only those that apply to the specific mobile device.
Parameter
Device 1,2,3
Send Key Messages
(WEDGE)
3-78
Function
1 - Default is Disabled
2 - Default is Disabled
3 - Default is Disabled
The data collection device (laser scanner, laser imager, external, or wireless).
Default: Enabled.
When Send Key Messages (WEDGE) is checked any data collection scan is converted to
keystrokes and sent to the active window. When this checkbox is not checked, the application will
need to use the set of Scanner APIs to retrieve the data from the scanner driver. Note that this latter
method is significantly faster than using Wedge.