Frequency Sweep Operation For The Fm Radio Mode; Store The Fm Frequency; Memory Frequency Recall - Standard Horizon HX210 Owner's Manual

2. Press the [▲]/[▼] key to select the desired
frequency.
3. To exit from the FM Broadcast Reception mode, press the [MENU/SET]
key to display MENU screen, then press the [CH] soft key.

Frequency sweep operation for the FM radio mode

1. Recall the FM Broadcast Reception mode (see above).
2. Press the [SWEEP] soft key to start sweep operation.
Sweeping will proceed from the lowest to the highest frequencies (step 100 kHz).
If the radio receives an FM station, the sweep will stop on the received frequency.
3. To cancel sweep operation, press the [▲]/[▼] key.

Store the FM frequency

1. While operating in the FM Broadcast receive
mode, select the desired FM frequency.
2. Press the [MEM] soft key to display the
"ADD" screen.
3. Press the [SELECT] soft key.
4. Press the [▲]/[▼] key to scroll through the letters
and choose the first letter of the name of the fre-
quency.
5. Press the [SELECT] soft key to store the first letter
in the name and step to the next letter to the right.
6. Repeat steps 4 and 5 until the name is complete. The name can consist
of up to twelve characters, and if you do not use all twelve characters,
press the [►] key to move to the next spaces. This method can also be
used to enter a blank space in the name.
If a mistake was made entering in the name, press the [◄]/[►] soft key
until the wrong character is selected, then perform steps 4 and 5.
7. After the twelve letters or spaces have been
entered, press the [SELECT] soft key, then
press the [ENTER] soft key to save and exit
to the FM Broadcast Receive mode.

Memory Frequency Recall

1. Press the [NEXT] soft key to recall the Last displayed FM broadcast memory.
2. Then press the [NEXT] soft key repeatedly to step sequentially through
the FM broadcast memories.
Page 26
HX210