Reset; About - Standard Horizon HX210 Owner's Manual

RESET

You may initialize the memories and settings of the setup categories inde-
pendently or return the transceiver to the original factory setting.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "RESET" with the [▲]/[▼] key, then press the [SELECT] soft key.
4. Press the [▲]/[▼] key to select the desired
category from: "CHANNEL", "CONFIG", or
"ALL" (all settings except the MMSI will be
initialized).
5. Press the [SELECT] soft key.
6. Press the [▲]/[▼] key to select "OK?", then press the [ENTER] soft key.

ABOUT...

Displays the version of the software currently operating on the transceiver.
HX210
Page 35