Listening To The Fm Broadcast Radio; Fm Broadcast Frequency; Sweep Operation; Store The Fm Frequency - Standard Horizon HX320E Owner's Manual

8.11 Listening to the FM Broadcast Radio

The HX320 includes provision for FM broadcast reception.
1. Press the [MENU/SET] key to display MENU
screen, then press the "RADIO" soft key.
The FM broadcast coverage is 65.000 to
108.000 MHz (100 kHz step) and utilizes
Wide-FM mode.
2. Press the [▲] or [▼] key to select the desired
frequency.
3. To exit from the FM Broadcast Reception mode, press the [MENU/SET] key
to display the MENU screen, then press the [CH] soft key. The transceiver will
revert to the channel in use prior to switching to the FM Broadcast band.
8.11.1 FM broadcast Frequency sweep operation
1. Recall the FM Broadcast Reception mode (see above).
2. Press the [SWEEP] soft key to start sweep operation.
Sweeping will proceed from the lowest to the highest frequencies (step 100 kHz).
If the radio receives an FM station, the sweep will stop on the received frequency.
3. To cancel sweep operation, press the [▲] or [▼] key.

8.11.2 Store the FM frequency

1. While listening in the FM Broadcast receive
mode, select the desired FM frequency.
2. Press the [MEM] soft key to display the "ADD"
screen.
3. Press the [SELECT] soft key.
4. Press the [▲] or [▼] key to scroll through the
letters and choose the first letter of the name
for the FM frequency.
5. Press the [SELECT] soft key to store the first letter
of the name and step to the next letter to the right.
6. Repeat steps 4 and 5 until the name is complete. The name can consist of
up to twelve characters, and if you do not use all twelve characters, press
the [►] key to move to the next spaces. This method can also be used to
enter a blank space within the name.
If a mistake was made entering in the name, press the [◄] or [►] soft key
until the wrong character is selected, then perform steps 4 and 5.
Page 26