Multi Watch (To Priority Channel); Setting Up The Multi Watch Operation; Starting The Dual Watch - Standard Horizon HX210 Owner's Manual

7.10 MULTI WATCH (TO PRIORITY CHANNEL)

Multi watch is used to scan two or three channels for communications.
m In Dual Watch, a normal VHF channel and the priority channel are
scanned alternately.
m In Triple Watch, a normal VHF channel, the priority channel, and the sub
channel are scanned alternately.
When a signal is received on the normal channel the radio briefly switches
between the normal channel and the priority channel to look for a transmis-
sion. If the radio receives communications on the priority channel the radio
stops and listens to the priority channel until communication ends and then
starts dual or triple watch scan again.
The priority channel and sub channel may be changed from CH16 (default)
and CH9 (default) to another channel. Refer to section " PRIORITY CH" or
"SUB SUB CH" on page 29 to 29 for details.

7.10.1 Setting up the Multi Watch Operation

1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CHANNEL SETUP".
3. Press the [SELECT] soft key, then select "MULTI WATCH" with the [▲]/
[▼] key.
4. Press the [SELECT] soft key.
5. Press the [▲]/[▼] key to select "DUAL" or
"TRIPLE".
DUAL (Dual Watch):
TRIPLE (Triple Watch): The HX210 watches the activity of the priority
6. Press the [ENTER] soft key to store the selected setting.
7. Press the [CLR/

7.10.2 Starting the Dual Watch

1. Press the [SQL] switch, then press the [▲]/[▼] key until background
noise disappears.
2. Press the [▲]/[▼] key to select a channel you wish to watch.
3. Press one of the soft keys.
4. Press the [◄]/[►] key repeatedly, until the [DW] soft key is displayed at
the bottom of the LCD.
Page 24
NOTE
The HX210 watches the activity of the current
channel and the priority channel.
channel, the sub channel, and the current channel.
] key to return to radio operation.
HX210