Key Setup; Backlit Level - Standard Horizon HX210 Owner's Manual

Water Hazard
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "STROBE LED" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Select "WATER HAZARD" with the [▲]/[▼] key, then press the [SELECT]
soft key.
5. Press the [▲]/[▼] key to select the desired
setting. You can select one from "OFF", "ON",
or "ON/PWR ON".
OFF: The LED does not light up.
ON: The LED lights up.
ON/PWR ON: The LED lights up and the
transceiver turns on even if
the transceiver is OFF.
6. Press the [ENTER] soft key to store the selected level.
7. Press the [CLR/

KEY SETUP

The function assigned to the function screen Soft Keys can be changed (see
page 27 "7.12 Soft Keys").

BACKLIT LEVEL

The backlight brightness may be adjusted in 5 levels.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "BACKLIT TIMER" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Press the [▲]/[▼] key to select the desired
setting, from "1" to "5", or "OFF".
5. Press the [ENTER] soft key to store the se-
lected level.
6. Press the [CLR/
HX210
] key to return to radio operation.
] key to return to radio operation.
Page 33