Edit; Delete; Config; Key Beep - Standard Horizon HX210 Owner's Manual

EDIT

This selection is used to edit the frequency and name.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "FM SETUP", then press the [SELECT]
soft key.
3. Press the [▲]/[▼] key to select "EDIT", then press the [SELECT] soft
key.
4. Press the [▲]/[▼] key to select the memory
to be edited, then press the [ENTER] soft
key.
5. Use the same procedure as described in steps 4 to 13 of "ADD" in the
previous section.

DELETE

This selection can delete the frequency data stored on an FM Broadcast memory.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "FM SETUP", then press the [SELECT]
soft key.
3. Press the [▲]/[▼] key to select "DELETE", then press the [SELECT] soft
key.
4. Press the [▲]/[▼] key to select the memory
to be deleted, then press the [ENTER] soft
key.
The delete confirmation screen will appear.
5. Press the [▲]/[▼] key to select "OK?" (delete) or "CANCEL" (cancel),
then press the [SELECT] soft key.

CONFIG

KEY BEEP

This selection is used to select the beep tone volume level when a key is
pressed.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "KEY BEEP" with the [▲]/[▼] key, then press the [SELECT] soft
key.
HX210
Page 31