Battery Save; Strobe Led - Standard Horizon HX210 Owner's Manual

4. Press the [▲]/[▼] key to select the desired
level. The beep level can be set from "1" to
"5", or "OFF".
5. Press the [ENTER] soft key to store the se-
lected level.
6. Press the [CLR/

BATTERY SAVE

This function allows you to change the battery save mode setting.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "BATTERY SAVE" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Press the [▲]/[▼] key to select the desired
setting. You can select one from "OFF",
"50%", "70%", "80%", or "90%".
5. Press the [ENTER] soft key to store the se-
lected setting.
6. Press the [CLR/

STROBE LED

This selection is used to switch and set the function of the strobe LED.
Emergency
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "STROBE LED" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Select "EMERGENCY" with the [▲]/[▼] key, then press the [SELECT]
soft key.
5. Press the [▲]/[▼] key to select the desired
setting. You can select one from "CON-
TINIOUS", "SOS", "BLINK 1", "BLINK 2", or
"BLINK 3".
6. Press the [ENTER] soft key to store the se-
lected setting.
7. Press the [CLR/
Page 32
] key to return to radio operation.
] key to return to radio operation.
] key to return to radio operation.
HX210