Belt Clip Installation / Removal - Standard Horizon HX210 Owner's Manual

The SAD-23B is NOT designed to be waterproof. Do not attempt to
charge in water hazardous locations.
 The SAD-23B is only designed for the charging of the HX210's buil-
tin battery, and is not suitable for other purposes. The SAD-23B may
contribute noise to TV and radio reception in the immediate vicinity, so
it is not recommended for use adjacent to such devices.
 When carefully maintained, a built-in battery should be useful for
about 300 charge/discharge cycles.

5.3 BELT CLIP INSTALLATION / REMOVAL

r To install the Belt Clip: align the
Belt Clip to the groove of the rear
of the transceiver, then press the
Belt Clip downward until it locks
in place with a "Click".
HX210
CAUTION
NOTE
r To remove the Belt Clip: press
the Belt Clip Tab away from the
rear of the transceiver to unlock
the Belt Clip, then slide the Belt
Clip upward to remove it.
Hand Strap Installation
Page 11