Preset Channels: Instant Access; Channel Banks; Operation On A Preset Channel - Standard Horizon HX210 Owner's Manual

7.8 PRESET CHANNELS: INSTANT ACCESS

10 preset channels can be programmed for instant access. Press one of the
soft keys. Press the [◄]/[►] key repeatedly, then press the [PRESET] soft
key. Pressing the [PRESET] key activates the user assigned channel bank.
If the [PRESET] soft key is pressed and no preset channels have been as-
signed, an alert beep will be emitted from the speaker.
7.8.1 PROGRAMMING PRESET CHANNEL BANKS
1. Select the desired channel to be assigned into the Preset Channel Bank
using the [▲]/[▼] key.
2. Press one of the soft keys.
3. Press the [◄]/[►] key repeatedly, until the
[P-SET] soft key is displayed at the bottom
of the LCD.
4. Press and hold the [P-SET] soft key until the
"P-SET" icon and channel number are blink-
ing.
5. Press the [ADD] soft key to program the
channel into the preset channel memory. "P-
SET" icon will appear.
6. Repeat steps 1 through 5 to program the additional channels into the
preset channels. Up to 10 channels can be registered. If you attempt to
register an 11th channel, the error beep will sound.

7.8.2 OPERATION on a Preset Channel

1. Press one of the soft keys.
2. Press the [◄]/[►] key repeatedly, until the
[P-SET] soft key is displayed at the bottom
of the LCD.
3. Press the [P-SET] soft key, then press the
[▲]/[▼] key to select the desired preset
channel.
4. To return to the previous operation channel, press one of the soft keys, then
press the [P-SET] soft key. The "P-SET" icon will disappear from the display.
Page 20
HX210