Backlit Timer; Contrast - Standard Horizon HX210 Owner's Manual

BACKLIT TIMER

This menu selection is used to setup the illumination time of the display and
keypad.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "BACKLIT TIMER" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Press the [▲]/[▼] key to select the desired
time.
OFF: Disables the display/key-
pad lamp illumination.
3/5/10/30 Sec: Illuminates the display/key-
pad for the selected time
when you press any key
(except the PTT switch).
CONTINUOUS: Illuminates the display/key-
pad continuously.
5. Press the [ENTER] soft key to store the selected level.
6. Press the [CLR/

CONTRAST

You may adjust the contrast in 30 levels.
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CONFIG", then press the [SELECT] soft
key.
3. Select "CONTRAST" with the [▲]/[▼] key, then press the [SELECT] soft
key.
4. Press the [▲]/[▼] key to select the desired
level. The contrast level can be set from "0"
to "30" ("16" is default).
5. Press the [ENTER] soft key to store the se-
lected level.
6. Press the [CLR/
Page 34
] key to return to radio operation.
] key to return to radio operation.
HX210