Menu ("Setup"); Channel Setup; Channel Group; Weather Alert - Standard Horizon HX210 Owner's Manual

8. MENU ("SETUP")

The HX210's Menu Mode allows enables a number of the HX210 operating
parameters to be custom-configured.
Use the following procedure to activate and set The Menu Mode parameters:
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select the desired menu item, then press the
[SELECT] soft key.
3. Press the [▲]/[▼] key to select the desired menu item, then press the
[SELECT] soft key.
4. Press the [▲]/[▼] key to select the desired setting.
5. Press the [ENTER] soft key to store the selected setting.
6. Press the [CLR/

CHANNEL SETUP

CHANNEL GROUP

This menu item enables setting the channel group from USA channels, to
Canada channels, or International channels.
Refer to section "7.5 USA, CANADIAN, AND INTERNATIONAL CHANNELS" for details.

WEATHER ALERT

Enables/disables the NOAA Weather Alert function. The default setting is "OFF".
1. Press and hold the [MENU/SET] key.
2. Press the [▲]/[▼] key to select "CHANNEL SETUP", then press the [SE-
LECT] soft key.
3. Select "WEATHER ALERT" with the [▲]/[▼] key, then press the [SELECT]
soft key.
4. Press the [▲]/[▼] key to select "ON" or
"OFF".
5. Press the [ENTER] soft key to store the new
setting.
6. Press the [CLR/

SCAN MEMORY

Before scanning may begin, the desired scan channels must be pro-
grammed. This selection allows channels to be stored to the scan memory.
Refer to section "7.9.1 PROGRAMMING SCAN MEMORY" for details.

SCAN TYPE

This selection is used to change the scan mode between "M-SCAN" (Memory
Scan) and "P-SCAN" (Priority Scan). The default setting is "P-SCAN".
Refer to section "7.9.2 SELECTING SCAN TYPE" for details.
Page 28
] key to return to radio operation.
] key to return to radio operation.
HX210