Xcommand Systemunit Releasekey List; Xcommand Systemunit Releasekey Removeall; Xcommand Systemunit Softwareupgrade; Userinterface Commands - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xCommand SystemUnit ReleaseKey List

List all software versions that the system has a valid release key for.
Requires user role: ADMIN
Example:
xCommand SystemUnit ReleaseKey List

xCommand SystemUnit ReleaseKey RemoveAll

Removes all Release keys.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit ReleaseKey RemoveAll Confirm: Yes

xCommand SystemUnit SoftwareUpgrade

Initiate a software upgrade by fetching the software on a given URL. If the server requires username
and password these parameters must be included.
Requires user role: ADMIN
Parameters:
URL(r): <S: 0, 255>
UserName: <S: 0, 255>
Password: <S: 0, 255>
Example:
xCommand SystemUnit SoftwareUpgrade URL: "ftp://<ftp _ server _ ip _
address>/s52000tc4 _ 0 _ 0.pkg" UserName: testDownload Password: 1234
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

UserInterface commands

xCommand UserInterface OSD Close

xCommand UserInterface ScreenShot Get

xCommand UserInterface ScreenShot List

xCommand UserInterface ScreenShot Remove

122
xCommand xCommand
Clear all messages and indicators from the monitor(s).
Requires user role: USER
Parameters:
Element(r): <Menu>
Example:
xCommand UserInterface OSD Close Element: Menu
For internal use only.
Requires user role: ADMIN
Parameters:
ScreenShotId(r): <S: 0, 50>
Example:
xCommand UserInterface ScreenShot Get ScreenShotId:5
For internal use only.
Requires user role: ADMIN
Example:
xCommand UserInterface ScreenShot List
For internal use only.
Requires user role: ADMIN
Parameters:
ScreenShotId(r): <S: 0-50>
Example:
xCommand UserInterface ScreenShot Remove ScreenShotId:5
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.