Call Status - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Audio Input Connectors HDMI [n] EcReferenceDelay
Returns the detected latency for each loudspeaker to microphone path for systems supporting
HDMI input used as microphone input. The result is in milliseconds.
Value space of the result returned:
<Integer>
Example:
xStatus Audio Input Connectors HDMI 1 EcReferenceDelay
*s Audio Connectors HDMI 1 EcReferenceDelay: 0
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

Call status

xStatus Call
xStatus Call [n] Status
xStatus Call [n] Direction
xStatus Call [n] Protocol
138
xCommand
Shows the top level overview of the call status. The call identity is used when query for additional
information about the call.
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/
RemotePreserved>
Example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
States the direction of the call initiation. You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<Incoming/Outgoing>
Example:
xStatus Call 27 Direction
*s Call 27 Direction: Outgoing
** end
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call to
find the call identity.
Value space of the result returned:
<String>
Example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.