Cisco TelePresence SX20 Codec Reference Manual page 200

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Video Input MainVideoSource
Returns the local video input currently used as the main source. The main video source is set with
the xConfiguration Video Input VideoMainSource command.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end
xStatus Video Input Source [n] Resolution Height
Shows the resolution height (in pixels) for the video input source.
Value space of the result returned:
<0..3000>
Example:
xStatus Video Input Source 1 Resolution Height
*s Video Input Source 1 Resolution Height: 1080
** end
xStatus Video Input Source [n] Resolution Width
Shows the resolution width (in pixels) for the video input source.
Value space of the result returned:
<0..4000>
Example:
xStatus Video Input Source 1 Resolution Width
*s Video Input Source 1 Resolution Width: 1920
** end
xStatus Video Input Source [n] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
<0..300>
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus Video Input Source [n] Resolution FormatType
xStatus Video Input Source [n] Resolution FormatStatus
xStatus Video Input Source [n] MediaChannelId
200
xCommand
Shows the resolution format type for the video input source.
Value space of the result returned:
<Unknown/AnalogCVTBlanking/AnalogCVTReducedBlanking/AnalogGTFDefault/
AnalogGTFSecondary/AnalogDiscreteTiming/AnalogDMTBlanking/AnalogCEABlanking/Digital>
Example:
xStatus Video Input Source 1 Resolution FormatType
*s Video Input Source 1 Resolution FormatType: Digital
** end
Shows the resolution format status for the video input source.
Value space of the result returned:
<Ok/OutOfRange/NotFound/Interlaced/Error/Unknown>
Example:
xStatus Video Input Source 1 Resolution FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
For internal use only.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Source MediaChannelId
*s Video Input Source 1 MediaChannelId: 2
*s Video Input Source 2 MediaChannelId: 3
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.