Cisco TelePresence SX20 Codec Reference Manual page 140

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Call [n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Value space of the result returned:
<0..5>
Example:
xStatus Call FacilityServiceId
*s Call 3 FacilityServiceId: 1
** end
xStatus Call [n] Encryption Type
Shows the encryption type of the call. You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<"None"/"Aes-128">
Example:
xStatus Call 27 Encryption Type
*s Call 27 Encryption Type: "None"
** end
xStatus Call [n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<True/False>
Example:
xStatus Call 27 PlacedOnHold
*s Call 27 PlacedOnHold: False
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus Call [n] Duration
xStatus Call [n] SecurityStatus
xStatus Call [n] AnswerState
xStatus Call [n] ModifyState
140
xCommand
Shows the duration of a call (in seconds). You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<Integer>
Example:
xStatus Call 27 Duration
*s Call 27 Duration: 2354
** end
Security status of a call represents the least of the security statuses of all the endpoints involved in
a CUCM call.
Value space of the result returned:
<Invalid/Unknown/NotAuthenticated/Authenticated>
Indicates if a call is answered, ignored or has been automatically answered by a system.
Value space of the result returned:
<Unanswered/Ignored/Autoanswered/Answered>
Example:
xStatus Call AnswerState
*s Call 5 AnswerState: Answered
** end
Shows the current state of a pending Call Modify operation. Not in use in this software version.
OutgoingModify: a request CallEscalate to Video is pending.
IncomingModify: a peer has requested to escalate the call to Video.
Idle: No Call Modify operation is pending.
Value space of the result returned:
<Idle/Outgoing/Incoming>
Example:
xStatus Call ModifyState
*s Call 11 ModifyState: Idle
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.