Xstatus Network 1 Ipv6 Gateway; Xstatus Network 1 Mtu; Xstatus Network 1 Vlan Voice Vlanid; Xstatus Network 1 Cdp Platform - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Network 1 IPv6 Gateway

Shows the address of the IPv6 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end

xStatus Network 1 MTU

Shows the MTU (Maximum Transmission Unit) size for the network.
Value space of the result returned:
<Integer>
Example:
xStatus Network 1 MTU
*s Network 1 MTU: 1500
** end

xStatus Network 1 VLAN Voice VlanId

The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
<"Off"/"1".."4094">
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end

xStatus Network 1 CDP Platform

Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

xStatus Network 1 CDP Version

xStatus Network 1 CDP Capabilities

xStatus Network 1 CDP DeviceId

175
xCommand
Returns information about the software release version the switch is running.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3750E Software (C3750E-
UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)*Technical
Support: http://www.cisco.com/techsupport*Copyright (c) 1986-2011 by Cisco
Systems, Inc.*Compiled Thu 22-Dec-11 00:05 by prod _ rel _ team"
** end
Describes the functional capability for the switch in form of a device type. See documentation for
CDP protocol for more information.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.