Xcommand Systemunit Menupassword Set; Xcommand Systemunit Menupassword Validate; Xcommand Systemunit Notifications Removeall; Xcommand Systemunit Optionkey Add - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xCommand SystemUnit MenuPassword Set

Set a menu password to restrict access to Administrator Settings menu. If you have a remote
control the password can also be set from the on screen menu. If you have a Cisco TelePresence
Touch controller the menu password is set from the command line interface.
Requires user role: ADMIN
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Set Password:***********

xCommand SystemUnit MenuPassword Validate

Validate that the supplied password is correct.
Requires user role: ADMIN
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Validate Password:***********

xCommand SystemUnit Notifications RemoveAll

Clears the list of system notifications that are reported by xStatus SystemUnit Notifications Text/
Type.
Requires user role: ADMIN
Example:
xCommand SystemUnit Notifications RemoveAll

xCommand SystemUnit OptionKey Add

Add an option key to support additional features.
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit OptionKey Add Key:******************
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

xCommand SystemUnit OptionKey List

xCommand SystemUnit OptionKey Remove

xCommand SystemUnit OptionKey RemoveAll

xCommand SystemUnit ReleaseKey Add

121
xCommand xCommand
List all option keys that have been added to the system. Added in TC7.3.3.
Requires user role: ADMIN
Example:
xCommand SystemUnit OptionKey List
Remove an individual Option key. Added in TC7.3.3.
Requires user role: ADMIN
Parameters:
Type(r): <DualDisplay/MultiSite/NaturalPresenter/PremiumResolution/RemoteMonitoring>
Example:
xCommand SystemUnit OptionKey Remove Type: PremiumResolution
Remove all Option keys.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit OptionKey RemoveAll Confirm: Yes
Add the software release key. Used to enable new software (applicable for main software releases).
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit ReleaseKey Add Key:******************
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.