Cisco TelePresence SX10
Introduction
SystemUnit commands
xCommand SystemUnit Boot
Reboot the system.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand SystemUnit Boot [Action: Action]
where
: Restart/Shutdown
Action
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API
xConfiguration
xCommand
xCommand
xCommand SystemUnit FactoryReset
Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit FactoryReset Confirm:
TrailingAction]
where
: Yes
Confirm
Include to confirm your choice.
: LocalSetup/Network/Spark/Provisioning/SerialPort/Certificates
Keep
Select which configurations to keep when you factory reset the system.
LocalSetup:
xConfiguration Audio DefaultVolume
xConfiguration Audio SoundsAndAlerts RingVolume
xConfiguration Time Zone
xConfiguration UserInterface Language
xConfiguration Video Output Connector OverscanLevel
xCommand Camera Preset Store
Network:
xConfiguration Network 1
xConfiguration NetworkServices Wifi Allowed
xConfiguration NetworkServices Wifi Enabled
Spark:
xConfiguration Spark ServiceOverrides GdsBaseUrl
xConfiguration Spark ServiceOverrides U2CBaseUrl
xConfiguration Spark ServiceOverrides WdmBaseUrl
115
API Reference Guide
xStatus
Appendices
Confirm
[Keep: Keep] [TrailingAction:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.