Cisco TelePresence SX20 Codec Reference Manual page 192

Cisco TelePresence SX20 Codec
Contents Introduction
Standby status
xStatus Standby Active
Shows if the system is in standby or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Standby Active
*s Standby Active: Off
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
SystemUnit status
xStatus SystemUnit
xStatus SystemUnit ProductType
xStatus SystemUnit ProductId
xStatus SystemUnit ProductPlatform
192
xCommand
Shows the top level overview of the system unit status.
Shows the product type.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit ProductType
*s SystemUnit ProductType: "Cisco TelePresence Codec"
** end
Shows the product identity.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit ProductId
*s SystemUnit ProductId: "Cisco TelePresence Codec C90"
** end
Shows the product platform.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit ProductPlatform
*s SystemUnit ProductPlatform: "C90"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.