Cisco TelePresence SX20 Codec Reference Manual page 199

Cisco TelePresence SX20 Codec
Contents Introduction
Time status
xStatus Time
Shows the top level overview of the time status.
xStatus Time ZoneOlson
Shows the current time zone in Olson format.
Value space of the result returned:
<String>
Example:
xStatus Time ZoneOlson
*s Time ZoneOlson: Europe/Berlin
** end
xStatus Time SystemTime
Returns the date and time set on the system.
Value space of the result returned:
<String>
Example:
xStatus Time SystemTime
*s Time SystemTime: "2014-04-25T10:04:03Z"
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
Video status
xStatus Video Input
xStatus Video Monitors
xStatus Video Input LastConnectedSource
199
xCommand
Shows the top level overview of the video input status.
Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Value space of the result returned:
<Single/Dual/DualPresentationOnly/Triple/Quadruple>
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end
Shows the last connected video input source.
Value space of the result returned:
<1..1>
Example:
xStatus Video Input LastConnectedSource
*s Video Input LastConnectedSource: 0
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.