Systemunit Commands; Xcommand Systemunit Boot; Xcommand Systemunit Factoryreset; Xcommand Systemunit Notifications Removeall - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

SystemUnit commands

xCommand SystemUnit Boot

Reboot the system.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit Boot [Action: Action]
where
Action: Restart/Shutdown
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart.

xCommand SystemUnit FactoryReset

Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit FactoryReset Confirm:
TrailingAction]
where
Confirm: Yes
TrailingAction: NoAction/Restart/Shutdown
Select Shutdown or NoAction to override the default behaviour (Restart).
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
Confirm [TrailingAction:
xCommand xCommand

xCommand SystemUnit Notifications RemoveAll

Clears the list of system notifications that are reported by xStatus SystemUnit Notifications
Text/Type.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit Notifications RemoveAll

xCommand SystemUnit OptionKey Add

Add an option key to support additional features.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey Add Key: "Key"
where
Key: String (16, 24)
The key you have received for the option you wish to switch on.

xCommand SystemUnit OptionKey List

List all option keys.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey List
118
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.