Xcommand Usermanagement Remotesupportuser Getstate; Video Commands - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xCommand UserManagement RemoteSupportUser GetState

Retrieves the state of the generated remote support user, if one exists.
Requires user role: ADMIN
Example:
xCommand UserManagement RemoteSupportUser GetState
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

Video commands

xCommand Video AutoPresentationStart Disable
xCommand Video AutoPresentationStart Enable
xCommand Video Layout SetPresentationView
124
xCommand xCommand
Not in use in this software version.
Requires user role: ADMIN
Example:
xCommand Video AutoPresentationStart Disable
Not in use in this software version.
Requires user role: ADMIN
Example:
xCommand Video AutoPresentationStart Enable
Set the presentation view mode.
View: Select Default when you want the presentation to be viewed with the default settings for the
codec. Select Maximized when you want the presentation to be displayed in full screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
Requires user role: ADMIN
Parameters:
View(r): <Default/Maximized/Minimized>
Example:
xCommand Video Layout SetPresentationView View:Default
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.