Xconfiguration Standby Bootaction; Xconfiguration Standby Standbyaction; Xconfiguration Standby Wakeupaction - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Standby BootAction

Define the camera position after a restart of the codec.
Requires user role: ADMIN
Default value: DefaultCameraPosition
USAGE:
xConfiguration Standby BootAction:
where
BootAction
: None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.

xConfiguration Standby StandbyAction

Define the camera position when going into standby mode.
Requires user role: ADMIN
Default value: PrivacyPosition
USAGE:
xConfiguration Standby StandbyAction:
where
StandbyAction
: None/PrivacyPosition
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xConfiguration
BootAction
StandbyAction
xCommand

xConfiguration Standby WakeupAction

Define the camera position when leaving standby mode.
Requires user role: ADMIN
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction:
where
WakeupAction
: None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
77
API Reference Guide
xStatus Appendices
WakeupAction
Copyright © 2016 Cisco Systems, Inc. All rights reserved.