Configuring A Switch To Receive Mac Address-Table Move Updates - Cisco Catalyst 4500 Series Software Configuration Manual

Cisco ios xe release 3.9.xe and cisco ios release 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 24
Configuring Flex Links and MAC Address-Table Move Update
Switch-ID : 01d0.2bfc.3180
Dst mac-address : 0180.c200.0010
Vlans/Macs supported : 4096/55000
Default/Current settings: Rcv Off/Off, Xmt Off/On
Max packets per min : Rcv 100, Xmt 120
Rcv packet count : 0
Rcv conforming packet count : 0
Rcv invalid packet count : 0
Rcv packet count this min : 0
Rcv threshold exceed count : 0
Rcv last sequence# this min : 0
Rcv last interface : None
Rcv last src-mac-address : 0000.0000.0000
Rcv last switch-ID : 0000.0000.0000
Xmt packet count : 0
Xmt packet count this min : 0
Xmt threshold exceed count : 0
Xmt pak buf unavail cnt : 0
Xmt last interface : fa1/2

Configuring a Switch to Receive MAC Address-Table Move Updates

To configure a switch to receive and process MAC address-table move update messages, perform this
task:
Command
Step 1
Switch# configure terminal
Step 2
Switch(conf)# mac address-table move update
receive
Step 3
Switch(conf)# end
Step 4
Switch# show mac address-table move update
Step 5
Switch# copy running-config startup config
To disable the MAC address-table move update feature on the access switch, enter the
no mac address-table move update receive configuration command. To display the MAC address-table
move update information, enter the show mac address-table move update command.
This example shows how to configure a switch to receive and process MAC address-table move update
messages:
Switch# configure terminal
Switch(conf)# mac address-table move update receive
Switch(conf)# end
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Configuring MAC Address-Table Move Update
Purpose
Enters global configuration mode.
Enables the switch to receive and process the MAC
address-table move updates.
Returns to privileged EXEC mode.
Verifies the configuration.
(Optional) Saves your entries in the switch startup
configuration file.
24-11

Advertisement

Table of Contents
loading

Table of Contents