Cisco Catalyst 4500 Series Software Configuration Manual page 643

Chapter 17 Configuring VLANs, VTP, and VMPS
Figure 17-4
Primary VMPS
End
station 1
Secondary VMPS
End
station 2
Secondary VMPS
Two topologies are possible.
a Catalyst 4500 series switch operating as a VMPS client.
station attached to a Cisco IP Phone, which is attached to a Catalyst 4500 series switch.
Figure 17-5
Endstation
(in VLAN 10)
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Dynamic Port VLAN Membership Configuration
Catalyst 4000
(CatOS)
172.20.26.150
Server 1
Switch 1
Client
3/1
172.20.26.151
Switch 2
Catalyst 6000
(CatOS)
172.20.26.152
Server 2
Switch 3
172.20.26.153
Switch 4
172.20.26.154
Switch 5
172.20.26.155
Switch 6
172.20.26.156
Switch 7
172.20.26.157
Switch 8
Client
172.20.26.158
Switch 9
URT
172.20.26.159
Server 3 Switch 10
Figure 17-5
Topology with an End Station Attached Directly to a Catalyst 4500 Series Switch
Operating as a VMPS Client
Catalyst 4500 (IOS)
(VMPS client)
Router
illustrates a topology with one end station attached directly to
Figure 17-6
Internet
Catalyst 4500 (CatOS)/
Catalyst 6500 (CatOS)/
URT
(VMPS server)
VLAN Membership Policy Server
TFTP server
172.20.22.7
illustrates a topology with an end
17-29