Cisco Catalyst 4500 Series Software Configuration Manual page 301

Chapter 5 Configuring Virtual Switching Systems
Redundancy Mode (Operational) = Stateful Switchover
Redundancy Mode (Configured) = Stateful Switchover
Communications = Up
client_notification_TMR = 240000 milliseconds
Switch# show redundancy
Redundant System Information :
------------------------------
Switchovers system experienced = 2
Configured Redundancy Mode = Stateful Switchover
Current Processor Information :
------------------------------
Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.00.SGN1.33 CISCO INTERNAL USE ONLY
UNIVERSAL PRODUCTION K10 IOSD VERSION , synced to END_OF_FLO_ISP
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Aug
bootflash:cat4500e-universal.SSA.03.03.00.SGN1.33.151-2.SGN1.33.bin,12;bootflash:cat4500e-
universal.SSA.03.03.00.SGN1.34.151-2.SGN1.34.bin,12;
Peer Processor Information :
------------------------------
Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.00.SGN1.33 CISCO INTERNAL USE ONLY
UNIVERSAL PRODUCTION K10 IOSD VERSION , synced to END_OF_FLO_ISP
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 09-Au
bootflash:cat4500e-universal.SSA.03.03.00.SGN1.33.151-2.SGN1.33.bin,12;bootflash:cat4500e-
universal.SSA.03.03.00.SGN1.34.151-2.SGN1.34.bin,12;
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Mode = Duplex
Unit = Primary
Unit ID = 1
Redundancy State = Stateful Switchover
Manual Swact = enabled
client count = 74
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
keep_alive threshold = 18
RF debug mask = 0
Available system uptime = 3 hours, 50 minutes
Standby failures = 1
Last switchover reason = active unit removed
Hardware Mode = Duplex
Operating Redundancy Mode = Stateful Switchover
Maintenance Mode = Disabled
Communications = Up
Active Location = slot 1/1
Current Software state = ACTIVE
Uptime in current state = 45 minutes
Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3
BOOT =
Configuration register = 0x2102
Standby Location = slot 2/1
Current Software state = STANDBY HOT
Uptime in current state = 25 minutes
Image Version = Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3
BOOT =
Configuration register = 0x2102
In-Service Software Upgrade (ISSU) on a VSS
5-75