Cisco Catalyst 4500 Series Software Configuration Manual page 336

Monitoring Programmability
Table 6-1 Monitoring Programmability
Show Command
show virtual-service detail [name
virtual-services-name]
show virtual-service list
show virtual-service storage pool
list
show virtual-service storage volume
list
show virtual-service version name
virtual-services-name installed
show virtual-service tech-support
show virtual-service redundancy
state
show virtual-service utilization
statistics CPU
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
6-24
Purpose
Displays a list of resources committed to a specified application, including attached
devices.
Displays the list of applications installed in the virtual services container. The
following is sample output for this command:
Switch# show virtual-service list
Virtual Service List:
Name Status Package Name
-----------------------------------------------------------------------
dmi Activated cat4500e_20160725-212823.ova
Displays an overview of storage locations (pools) used for virtual service containers.
Displays an overview of storage volume information for virtual service containers.
Displays the version of an installed application. For example:
Switch# show virtual-service version name dmi installed
Virtual service dmi installed version:
Name : Netconf-Yang
Version : 1.0.0
Displays container-based information.
Displays synchronization status
Displays virtual service CPU utilization statistics.
Chapter 6 Programmability