Table of Contents
Advertisement
Troubleshooting
Basic Printer Problems
Some printer problems can be easy to resolve. If a problem occurs with your printer, check each of the following:
•
The power cable is connected to the printer, and to a properly grounded electrical outlet.
•
The printer is turned on.
•
The electrical outlet is not turned off at any switch or breaker.
•
Other electrical equipment plugged into the outlet is working.
If you have checked all of the above and still have a problem, turn off the printer, wait for 10 seconds, and then turn
on the printer. This often fixes the problem.
NOTE:
If error messages are displayed on the operator panel or on your computer screen, follow the on-screen instructions to
resolve the printer problems. For details about error messages and status codes, see "Understanding Printer Messages" on
page 303.
Display Problems
Problem
Menu settings changed from the operator
panel have no effect.
Printing Problems
NOTE:
A password is required to enter the
enter the password you specified, and press the
Problem
Job did not print or incorrect characters
printed.
Action
Settings in the software program, the printer driver, or the printer utilities have
precedence over the settings made on the operator panel.
Change the menu settings from the printer driver, the printer utilities, or the
software program instead of the operator panel.
menu when
Admin Menu
(Set) button.
Action
Ensure that
Ready to Copy
job to print.
Ensure that print media is loaded in the printer.
Verify that you are using the correct printer driver.
Ensure that you are using the correct Ethernet or USB cable and that it is securely
connected to the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Check the interface of your printer from the
Determine the host interface you are using. Print a panel settings page to verify
that the current interface settings are correct. Refer to "Printing a Report/List
Using the Operator Panel" on page 175 for details on how to print a panel settings
page.
is set to
Panel Lock Set
appears on the operator panel before you send a
Admin Menu
27
. In this case,
Enable
.
347
Troubleshooting
Advertisement
Table of Contents
Troubleshooting
