Troubleshooting - Dell 1600n User Manual

Troubleshooting PS Errors
The following situations are PS language specific and may occur when several printer languages are being
used.
NOTE: To receive a printed or screen displayed message when PS errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
Problem
PostScript file can not be
printed.
"This job contains
binary data..."
message appears.
A PS error page prints.
The optional Tray2 is not
selected in the driver.
Possible Cause
The PostScript option may not be
installed.
The pure binary data option is not
supported by the PostScript driver.
Print job may not be PS.
The printer driver has not been
configured to recognize the
optional Tray2.
Solution
Print a configuration page and verify that the PS version
is available for printing.
Open the Properties of the PostScript driver, click on
PostScript, and click on Advanced. The pure binary data
option is not supported. Choose another.
Make sure that the print job is a PS job. Check to see
whether the software application expected a setup or PS
header file to be sent to the printer.
Open the PostScript driver properties and set the Option
Tray item of the Device option to Installed.
183
Trou ble sho oting