Dell C1765NFW User Manual page 275

Press the button repeatedly to display TO or BCC as a destination type, and then press the
d
button.
5 Press the button until Preferences is highlighted, and then press the
6 Ensure that From Setting is highlighted, and then press
NOTE:
If this setting item is not displayed, make sure that
From Field" on page 198.
7 Specify the sender address of the e-mail using the numeric keypad or the Address Book.
The specified address is notified to the recipient when the e-mail is sent. If no e-mail address is specified here, the
address in Reply Address is notified as a sender information instead. For details, see "E-Mail Alert" on
page 129.
NOTE:
Be sure to specify an e-mail address either in
printer cannot start sending the e-mail.
8 Configure the scan settings as necessary.
Settings such as file format and color mode are available. For details about setting items, see "Scan Defaults" on
page 168.
9 Ensure that Start Scan is highlighted, and then press the
(Set) button.
is set to
Edit From Field
or in
From Setting Reply Address
(Start) button.
(Set)
(Set) button.
. For details, see "Edit
Enable
. Otherwise, the
Scanning
273