Margin Top/Bottom; Margin Left/Right - Dell C1765NFW User Manual

6 If necessary, customize the copy settings including the number of copies, contrast, and image quality. See "Setting
Copy Options" on page 235.
7 Ensure that Start Copy is highlighted, and then press the
When you are using the document glass and Multiple-Up is set to Auto, or Manual, the display prompts you
for another page. Press the
If you select Yes, press the

Margin Top/Bottom

To specify the top and bottom margins of the copy:
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2 Press the
(Copy) button.
3 Press the button until Preferences is highlighted, and then press the
4 Press the
button until Margin Top/Bottom is highlighted, and then press the
5 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
4 mm*/0.2 inch*
Available Range:
0-50 mm/0.0-2.0 inch

Margin Left/Right

To specify the left and right margins of the copy:
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the
4 Press the
button until Margin Left/Right is highlighted, and then press the
5 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
242
Copying
button to select Yes or No, and then press the
button to select Continue or Cancel, and then press the
*
) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
*
) are the factory default menu settings.
(Start) button to begin copying.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set)
(Set)