Table of Contents
Advertisement
Port Settings
Purpose:
To enable or disable printing connectors and management protocol features.
NOTE:
The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the
settings, click Apply New Settings to apply the new settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Values:
*1
Ethernet
Port Status
*1
This item is available only when the printer is connected with a wired network.
126
Dell™ Printer Configuration Web Tool
Ethernet Settings
Current Ethernet Settings
MAC Address
LPD
Port9100
E-Mail Alert
SNMP
WSD
Bonjour (mDNS)
Status Messager
*
Auto
10Base-T Half-Duplex
10Base-T Full-Duplex
100Base-TX Half-Duplex
100Base-TX Full-Duplex
Displays the current settings of Ethernet.
Displays the MAC address of the printer.
Specifies whether to enable LPD.
Specifies whether to enable Port9100.
Specifies whether to enable the E-Mail Alert feature.
Specifies whether to enable the SNMP .
Specifies whether to enable the WSD port.
Specifies whether to enable the Bonjour (mDNS) feature.
Specifies whether to enable the Status Messager.
Detects Ethernet transmission
rate and the duplex settings
automatically.
Selects 10Base-T Half-Duplex as
the default value.
Selects 10Base-T Full-Duplex as
the default value.
Selects 100Base-TX Half-Duplex
as the default value.
Selects 100Base-TX Full-Duplex
as the default value.
Advertisement
Table of Contents
Troubleshooting
